Wind resource file stored on your computer Question2

I already check the format of wind resource file
samrepo.nrelcloud.org/help/weather_format_csv_wind.html
But It is impossible using without air pressure at 100m, air pressure at 200m,,,etc..?
I have only wind power generation rate kW and wind speed m/s temperature, humidity...
 

Hello,

This is a follow-up question to sam.nrel.gov/forum/forum-general/4679-wind-resource-file-stored-on-your-computer.html .

As described in the SAM CSV Format for Wind topic in Help:

Required columns are:

• wind speed for at least one height above the ground
• wind direction for at least one height above the ground
• temperature for at least one height above the ground
• atmospheric pressure for at least one height above the ground

The wind power output in kW is an output of the Wind Power model. SAM will ignore that data if you include it in the file.

Best regards,
Paul.