PySAM | Standalone Battery Simulation

  • Jawwad Aga
  • Topic Author
More
03 Jun 2022 07:04 #11058 by Jawwad Aga
PySAM | Standalone Battery Simulation was created by Jawwad Aga
I could not find any auxiliary loss parameter in PySAM for a Standalone Battery Module

Could you provide some reference on how to calculate for air-cooling/liquid-cooling ?

Would be great to have this in PySAM itself

Please Log in or Create an account to join the conversation.

  • Paul Gilman
More
03 Jun 2022 18:14 #11067 by Paul Gilman
Replied by Paul Gilman on topic PySAM | Standalone Battery Simulation
Hi Jawwad,

For information about SAM's modeling of battery thermal performance, please see Section 2.2 of the following reference listed on the Battery Publications page :

DiOrio, N.; Dobos, A.; Janzou, S.; Nelson, A.; Lunstrom, B. (2015). Technoeconomic Modeling of Battery Energy Storage in SAM. 32 pp. NREL/TP-6A20-64641 ( PDF 2.6 MB )

Best regards,
Paul.

Please Log in or Create an account to join the conversation.

Moderators: Paul Gilman
Powered by Kunena Forum

NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.

NREL Home

NREL Research

Follow NREL

NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.