NAME PLATE CAPACITY OF GENERATION

  • JOSE LUIS FIERRO
  • Topic Author
More
19 Mar 2013 06:43 #1442 by JOSE LUIS FIERRO
NAME PLATE CAPACITY OF GENERATION was created by JOSE LUIS FIERRO
Paul, how can I change the name plate capacity from 100 mwh to 30 mwh so I can make an advise for 30 mw plant

Please Log in or Create an account to join the conversation.

  • Paul Gilman
More
28 Mar 2013 22:03 #1443 by Paul Gilman
Replied by Paul Gilman on topic NAME PLATE CAPACITY OF GENERATION
Hello,

When you post a question to the forum, please tell me what kind of system you are modeling, and what model options you are using. In this case, are you modeling a parabolic trough system using the physical trough model? If so, you can change the system nameplate capacity on the Power Cycle page.

Best regards,
Paul.

Please Log in or Create an account to join the conversation.

Moderators: Paul Gilman
Powered by Kunena Forum

NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.

NREL Home

NREL Research

Follow NREL

NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.