How to link the SAM model to MATLAB/Simulink

  • m.irfan79577
  • Topic Author
More
04 Jun 2023 06:00 #12199 by m.irfan79577
How to link the SAM model to MATLAB/Simulink was created by m.irfan79577
Hi,
I built a model in SAM consisting of PV and battery systems, ran it for 25 years and got results for minimizing the electricity costs and prioritising the cheapest energy source (Please consider the attachment). Now my question is that how to integrate or send this model to MATLAB. Please describe in detail and if it is possible explain with an example. How can I use this data of SAM in MATLAB to make my model more useful? Thanks in advance

Regards,
Muhammad Irfan
Attachments:

Please Log in or Create an account to join the conversation.

  • pgilman
More
06 Jun 2023 11:37 #12204 by pgilman
Replied by pgilman on topic How to link the SAM model to MATLAB/Simulink
Hi Muhammad Irfan,

I don't have detailed instructions for integrating SAM into your MATLAB models, but you can find general information on the SAM Software Development Kit page: sam.nrel.gov/software-development-kit-sdk.html.

Best regards,
Paul.

Please Log in or Create an account to join the conversation.

Moderators: pgilman
Powered by Kunena Forum

NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.

NREL Home

NREL Research

Follow NREL

NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.