- Posts: 2
irrad_mode
- Frstudent
- Topic Author
Less
More
13 Aug 2019 12:31 #7612
by Frstudent
irrad_mode was created by Frstudent
Dears,
I'm a french student and I'm using SAM for an internship.
I use a file zith only GHI and DHI, so I want use you irad_mode = 2.
The probleñ is I dn't kmow where I must put this line. I'm using the user interface, must I use the SDK? A module for the SSC? Or use GIT?
I read the SSC guide and the SAM help, but I'm lost in all the informatons.
Best regards.
I'm a french student and I'm using SAM for an internship.
I use a file zith only GHI and DHI, so I want use you irad_mode = 2.
The probleñ is I dn't kmow where I must put this line. I'm using the user interface, must I use the SDK? A module for the SSC? Or use GIT?
I read the SSC guide and the SAM help, but I'm lost in all the informatons.
Best regards.
Please Log in or Create an account to join the conversation.
- pgilman
Less
More
- Posts: 5423
14 Aug 2019 16:14 - 14 Aug 2019 16:17 #7613
by pgilman
Replied by pgilman on topic irrad_mode
Dear Remi,
You can use a weather file that contains GHI and DHI if you use SAM's Detailed Photovoltaic model. You will find options for different combination of irradiance components on the Location and Resource page, under "Albedo - Sky Diffuse Model - Irradiance Data (Advanced):
Best regards,
Paul.
You can use a weather file that contains GHI and DHI if you use SAM's Detailed Photovoltaic model. You will find options for different combination of irradiance components on the Location and Resource page, under "Albedo - Sky Diffuse Model - Irradiance Data (Advanced):
Best regards,
Paul.
Attachments:
Last edit: 14 Aug 2019 16:17 by pgilman.
Please Log in or Create an account to join the conversation.
Moderators: pgilman