- Posts: 3
Battery not discharging
- BandGap1.1eV
- Topic Author
Less
More
19 Sep 2018 08:39 #6444
by BandGap1.1eV
Battery not discharging was created by BandGap1.1eV
I’m having difficulty getting my battery to dispatch for a grid tied, stand-alone PV array with DC coupled energy storage.
System sizes are as follows:
PV: 4.66 MWdc, 3.63 MWac
ESS: 2 MWdc, 4 MWhr capacity
It’s a standalone system so there is no load. The desire is to produce at nameplate (3.63 MWac) for as much time as possible with kWh’s being stored in the battery that would ordinarily be clipped, then allow the battery to discharge as daylight fades to maintain 3.63 MWac of output.
System sizes are as follows:
PV: 4.66 MWdc, 3.63 MWac
ESS: 2 MWdc, 4 MWhr capacity
It’s a standalone system so there is no load. The desire is to produce at nameplate (3.63 MWac) for as much time as possible with kWh’s being stored in the battery that would ordinarily be clipped, then allow the battery to discharge as daylight fades to maintain 3.63 MWac of output.
Please Log in or Create an account to join the conversation.
- pgilman
Less
More
- Posts: 5423
25 Sep 2018 11:27 #6445
by pgilman
Replied by pgilman on topic Battery not discharging
Hello,
In SAM 2017.9.5, power "clipped" by the inverter when the array output power exceeds the inverters rated input power does not charge the battery. In the next version of SAM, which we plan to release later this fall, clipped power will be available to charge the battery.
Best regards,
Paul.
In SAM 2017.9.5, power "clipped" by the inverter when the array output power exceeds the inverters rated input power does not charge the battery. In the next version of SAM, which we plan to release later this fall, clipped power will be available to charge the battery.
Best regards,
Paul.
Please Log in or Create an account to join the conversation.
Moderators: pgilman