- Posts: 2
Load profile
- Gabriel López
- Topic Author
Less
More
25 May 2018 01:14 #6271
by Gabriel López
Load profile was created by Gabriel López
Hi,
Is it possible to introduce a load profile in Process heat linear direct steam and parabolic trough mode?
Thanks,
Gabriel
Is it possible to introduce a load profile in Process heat linear direct steam and parabolic trough mode?
Thanks,
Gabriel
Please Log in or Create an account to join the conversation.
- pgilman
Less
More
- Posts: 5423
25 May 2018 11:48 #6272
by pgilman
Replied by pgilman on topic Load profile
Dear Gabriel,
No. You can only define the thermal load as a fixed value, using the "Heat sink power" input on the System Design input page.
Best regards,
Paul.
No. You can only define the thermal load as a fixed value, using the "Heat sink power" input on the System Design input page.
Best regards,
Paul.
Please Log in or Create an account to join the conversation.
- Gabriel López
- Topic Author
Less
More
- Posts: 2
28 May 2018 05:10 #6273
by Gabriel López
Replied by Gabriel López on topic Load profile
Thank you very much Paul.
Please Log in or Create an account to join the conversation.
- pgilman
Less
More
- Posts: 5423
04 Jun 2018 14:59 #6274
by pgilman
Replied by pgilman on topic Load profile
I've added this to the SAM project issues list on GitHub. We'll post any progress on this request here:
github.com/NREL/SAM/issues/84
Best regards,
Paul.
github.com/NREL/SAM/issues/84
Best regards,
Paul.
Please Log in or Create an account to join the conversation.
Moderators: pgilman