We will be performing a major infrastructure and web site ugprades on Friday, September 27th 8:00 am - 5:00 pm MST (UTC -7).

The website will be down during that time.

Flow Rate

  • FernandoK
  • Topic Author
More
05 May 2017 00:52 #5429 by FernandoK
Flow Rate was created by FernandoK
I am modeling a power tower with molten salt. How can i know the flow rate of de HTF at the receiver for the design point ?

Please Log in or Create an account to join the conversation.

  • pgilman
More
08 May 2017 20:55 #5430 by pgilman
Replied by pgilman on topic Flow Rate
Dear Fernando,

The Tower and Receiver input page displays the Maximum flow rate to receiver value under "Design and Operation." You can find the equation for that calculated value in the Help topic for the Tower and Receiver page.

Best regards,
Paul.

Please Log in or Create an account to join the conversation.

Moderators: pgilman
Powered by Kunena Forum

NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.

NREL Home

NREL Research

Follow NREL

NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.