- Posts: 9
Grid connection
- ahmed abdelrazik
- Topic Author
Less
More
26 May 2016 11:41 #4445
by ahmed abdelrazik
Grid connection was created by ahmed abdelrazik
can i generate a grid connection in SAM?
if not . can i use HOmer output to mix it with SAM?
if not . can i use HOmer output to mix it with SAM?
Please Log in or Create an account to join the conversation.
- Paul Gilman
Less
More
- Posts: 5666
27 May 2016 12:15 #4446
by Paul Gilman
Replied by Paul Gilman on topic Grid connection
Dear Ahmed,
SAM assumes that the renewable energy system is connected to the grid. For the residential and commercial financial models, the system meets a building or facility's electric load. When the system's electrical output is greater than the load, the system supplied electricity to the grid. When the system's output is less than the load, the grid supplies electricity to the load.
It is not possible to model a system that is not connected to the grid in SAM.
Best regards,
Paul.
SAM assumes that the renewable energy system is connected to the grid. For the residential and commercial financial models, the system meets a building or facility's electric load. When the system's electrical output is greater than the load, the system supplied electricity to the grid. When the system's output is less than the load, the grid supplies electricity to the load.
It is not possible to model a system that is not connected to the grid in SAM.
Best regards,
Paul.
Please Log in or Create an account to join the conversation.
Moderators: Paul Gilman