Thanks. However, I am not sure that I know how to translate the needed fields SAM from the CEC database. Below is what I am translating the CEC information to SAM's (on the right after the "=="), let me know any are wrong or if the scale selected is incorrect.
Manufacturer SolarCity
Model Number SC325
Description 325 W HIT Hybrid Amorphous /Monocrystalline Module
BIPV N
Nameplate Pmax 325
PTC 306.5
Notes
Family HIT-Si Thin Film
A_c 1.674 == MODULE AREA
N_s 96 == Number of Cells in Series
Technology Multi-c-Si == MultiSi
Nameplate Isc 6.03 == Short circuit current (Isc)
Nameplate Voc 69.6 == Open Circuit Voltage (Voc)
Nameplate Ipmax 5.65 == Maximum power point current (Imp)
Nameplate Vpmax 57.6 == Maximum Power Point voltage (Vmp)
Average NOCT 43.8 == Nominal operating cell temperature
?Pmax -0.31 == Temperature coefficient of max. power point %/*C
?Isc 0.03 == Temperature coefficient of Isc (A/*C)
?Voc -0.25 == Temperature coefficient of Voc (V/*C)
?Ipmax 0.002 ==
?Vpmax -0.31 ==
IPmax, low 1.13 ==
VPmax, low 55.79 ==
IPmax, NOCT 4.54 ==
VPmax, NOCT 54.4 ==
NREL Autosolver Date
NREL Autosolver Time
a_ref
I_L_ref
I_o_ref
R_s_ref
R_sh_ref
Adj
Mounting Rack
N_p 1
Type Flat Plate
Short Side 1.053
Long Side 1.59
Geometric Multiplier 1
P2/Pref 0.193857666