Assuming open is required, and as is required, the following 197 results were found.
-
Hello, Thank you for the kind words. I added Linux as an operating system option to the SAM website's user profile. We haven't changed that since long before we offered Linux versions of SAM. Thank you for pointing out the omission! Best regards,...
- Type: Forum Post
-
OK Paul, many thanks. Will do - once I'm through with any adware problem, corrupted Windows files, lack of hard drive space to serve as virtual memory, etc. One or more out of several things could be causing the trouble. Regards, RobertOK Paul, many...
- Type: Forum Post
-
Robert, Hopefully, your Windows 10 upgrade will fix the issue you are encountering... For reference, I downloaded and ran your project file, BLMS.sam using the phoenix weather file since I did not have the BLMSWEATHER RESULT 2019.smw referenced in your...
- Type: Forum Post
-
Hi Robert, We developed the "SMW" weather file format relatively early on in the history of SAM for a specific application, and then later developed a more flexible format we call "SAM CSV." SAM continues to be able to read files in the SMW format...
- Type: Forum Post
-
Thanks for all the info, Paul! Had more words with Microsoft this morning about my Windows 10 Version 20H2 install failure - and now it looks as if I have a hardware problem, possibly an impending hard drive failure (which I don't need!) "When it rains...
- Type: Forum Post
-
Hello again! I posted some comments about this to one of the Microsoft online discussion forums yesterday. You can see my posting here:- docs.microsoft.com/en-us/answers/questions/452240/windows-10-suspected-update-problems-and-nrel-syst.html I'm not...
- Type: Forum Post
-
I am following the installation steps for windows as detailed on github for building SAM. The installation works until building SAMOS from the system_advisor_model.sln. During building quite a lot of errors of type C2039 pop up regarding not finding...
- Type: Forum Post
-
Hi Lina, You might try looking at the code history on GitHub to see what changes might be causing the differences you note. For example, changes to cmod_pvsamv1.com are listed here: github.com/NREL/ssc/commits/develop/ssc/cmod_pvsamv1.cpp There is...
- Type: Forum Post
-
Hello everyone, There are a couple of questions here, and I'll try to address them in order. 1. To reiterate Paul's earlier response, some of the intermediate files are available after executing a SAM run by pressing Shift+F9 while in SAM. This opens a...
- Type: Forum Post
-
Dear CSPSAM, One source of information about storage for CSP systems is the . You can also search the for keywords like "csp storage" for more recent NREL publications on the subject. SAM's thermal energy storage (TES) model for CSP systems includes a...
- Type: Forum Post
-
Is there a way to compare results under different rate schedules. For example, can I show savings when a customer adds solar and moves to a different rate entirely. Specifically, I have a SCE customer currently in rate TOU-8-CPP and would like to show...
- Type: Forum Post
-
The Sandia and CEC models handle the effects of mounting very differently. The CEC requires that BIPV modules be tested as they are intended to be installed, which results in much higher NOCT values for those modules than for non-BIPV modules....
- Type: Forum Post
-
SAM comes with different ssc.dll files for 32-bit ( and 64-bit Windows operating systems. If you are compiling a 32-bit C program, you will need to use the 32-bit version of SSC.dll. For a 32-bit C program, you should run the code generator from the...
- Type: Forum Post
-
Dear Casey, The SDKtool interacts which whatever version of the ssc library you load. You can use the "Load/unload library" and "Choose SSC library" buttons in the Module Browser to choose a different library. To load the current library in SDKtook for...
- Type: Forum Post
-
Dear Casey, The SDKtool interacts which whatever version of the ssc library you load. You can use the "Load/unload library" and "Choose SSC library" buttons in the Module Browser to choose a different library. To load the current library in SDKtook for...
- Type: Forum Post
-
Hi Robert, As you note, SAM's Merchant Plant financial model requires time series data over the entire analysis period as input for energy market revenue prices, and any additional revenue from ancillary services. Depending on the simulation time step,...
- Type: Forum Post
-
Hi there I have a PV system with a battery and I keep getting the following error: exec fail(pvsamv1): Error calculating shading factor for subarray 0 at index 0. I did not change anything under shading, I've left all values as default. I've seen a...
- Type: Forum Post
-
Hi Bernardo, It is not possible to use the "actual field thermal output" variable as an input. SAM is open source, so you could theoretically build your own version of it, and then make modifications, but I am not sure how you would change that to be an...
- Type: Forum Post
-
Hi Gary, There is a bug in the Geothermal model that causes the Automatically estimate the plant cost per kW option on the Installation Costs page under "Plant Capital Cost" (toward the bottom of the page) not to work. Thank you for bringing it to our...
- Type: Forum Post
-
I was wondering if there are any plans to add a Brayton power cycle option to the CSP section of your SAM tool. If so, is there a beta version that I could test to see how it works? We are planning to implement a CO2 closed-Brayton-cycle models in SAM,...
- Type: Forum Post