Assuming hybrid is required, the following 141 results were found.
-
Hello, We do not have plans to make an ISCC model available for CSP technologies other than the power tower model. For the next version of SAM, we do plan to add an option for thermal applications of CSP systems where the thermal output is not coupled...
- Type: Forum Post
-
Can SAM version 2015.1.30 model Integrated Solar Combined Cycle (ISCC), that is CSP hybridization with gas turbines?Hi, Can SAM version 2015.1.30 model Integrated Solar Combined Cycle (ISCC), that is CSP hybridization with gas turbines?
- Type: Forum Post
-
No, SAM version 2015.1.30 does not have the capability to model ISCC plants- CSP hybridization with gas turbines. As Paul mentions above, that capability will hopefully be released in the next one or two versions of SAM. Best regards, JanineHello, No,...
- Type: Forum Post
-
Hello, That's right. For CSP models with thermal energy storage, you cannot configure the dispatch control inputs on the Thermal Energy Storage page in such a way as to prevent the solar field from delivering heat to the power cycle. The dispatch...
- Type: Forum Post
-
Hi, I would like to simulate a PV plant that generates electricity during sunshine hours while the CSP plant is only running in charging the storage to produce electricity when PV can't supply anymore in order to achieve a baseload power output if both...
- Type: Forum Post
-
Dear Christoph, Thank you for the message. It is not possible to control the timing of electricity delivery that precisely. SAM assumes that the CSP system delivers electricity to the grid as energy is available from the solar field and thermal energy...
- Type: Forum Post
-
Dear Paul, thank you for the answer! I was already thinking that it might not be possible, but could it somehow be implemented by modifying the weather file so that the load curve can be modeled? kind regards, Christoph PanDear Paul, thank you for the...
- Type: Forum Post
-
Dear Christoph, That might be possible, but I'm not sure how you would do it. You might also try taking the hourly results from the SAM models and manipulating them outside of SAM. Best regards, Paul.Dear Christoph, That might be possible, but I'm not...
- Type: Forum Post
-
KBBE4LIFE, I don't really understand your question. Could you please clarify? Best regards, Paul.KBBE4LIFE, I don't really understand your question. Could you please clarify? Best regards, Paul.
- Type: Forum Post
-
Hello! I want to use SAM to model the best combination of solar thermal energy and wind energy to heat a water tank. Can the model do this? I was able to get a combined case of solar+wind but the results don't show what energy percentage is solar and...
- Type: Forum Post
-
Dear Michael, SAM is not well suited for that application. You could use the results of a wind power case and solar water heating case to estimate the energy output of each system, and then model the water tank outside of SAM. If you are comfortable...
- Type: Forum Post
-
I see, thank you for your response, the model is quite good but I have a very specific need that no model can accuratly portray so far. Thank you for the advice, I think I will do the rest of the calculations outside of SAM, using the values for the...
- Type: Forum Post
-
Dear all, i want to simulate geothermal/solar hubrid power plant (CSP) under SAM software can you give me some explications about this project Thanks at advanceDear all, i want to simulate geothermal/solar hubrid power plant (CSP) under SAM software can...
- Type: Forum Post
-
Hello Paul Thank you for your answer Best regardsHello Paul Thank you for your answer Best regards
- Type: Forum Post
-
Dear all, Is there any possibility to simulate hydrid systems in SAM? Let's say CSP Power Tower molten salt coupled with PV installations? How could I manage? Thanks in advance. Sincerely, manuelDear all, Is there any possibility to simulate hydrid...
- Type: Forum Post
-
Then, can you pls guide how I can convert my XLS or CSV file to SRW format??Then, can you pls guide how I can convert my XLS or CSV file to SRW format??
- Type: Forum Post
-
Please see the format description of the SRW file format for wind resource data in SAM's Help system. You can find it in the table of contents under "Weather Data, Weather File Formats." Best regards, Paul.Please see the format description of the SRW...
- Type: Forum Post
-
model and Generic Battery model. See the SAM YouTube channel for a . Please see sam.nrel.gov/forum/forum-general/2973-hybrid-csp-pv-error-in-running-combine-cases-macros.html. Best regards, Paul.UPDATE: As of SAM 2021.12.02, the Combine Cases macro is...
- Type: Forum Post
-
here is the sam file. Best regards, Luisahere is the sam file. Best regards, Luisa
- Type: Forum Post
-
Hi Luisa, Thank you for sending the file. In SAM 2020.2.29, the Detailed PV model runs a simulation over the analysis period to better model module degradation. It turns out that the Combine Cases macro was written to work only for simulations over a...
- Type: Forum Post