Subarray voltage mismatch calculation requires more than one subarray.

2 posts / 0 new
Last post
Izabb
Subarray voltage mismatch calculation requires more than one subarray.

I'm trying to do a simulation and it throws me the following message: The calculation of subarray voltage mismatch requires more than one subarray. Check your entries. The pvsamv1 simulation failed.

The simulation is about the article Subarray voltage mismatch calculation requires more than one subarray.

The idea is to replicate exactly this article, to learn and to know in depth the use of SAM

Tags: 
Paul Gilman

Hello,

If you enable the voltage mismatch option, then your system must have more than one subarray. If your system has one subarray, then you should disable the voltage mismatch option.

Best regards,
Paul.

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer