Some problems with the parametric simulation

Start
Prev
1
Next
End

Weng Pin Wong
Topic Author
Junior Member

28 Apr 2021 07:33 #9534 by Weng Pin Wong

Some problems with the parametric simulation was created by Weng Pin Wong

Hi Paul,

Recently when I want to simulate the LCOE for different combinations of TES storage hours and solar multiple using parametric simulation, it shows that the LCOE will change with the storage hours but not with solar multiple.

However, when I go back to the system design panel and change the solar multiple values, the final LCOE did have changes, is there any solution to this issue?

Thanks.

Best regards,
Weng Pin.

Please Log in or Create an account to join the conversation.

Paul Gilman
Platinum Member

03 May 2021 17:49 - 03 May 2021 17:51 #9544 by Paul Gilman

Replied by Paul Gilman on topic Some problems with the parametric simulation

Hi Weng Pin,

For the Physical Trough model, you should use the specified_solar_multiple variable for parametric simulations instead of solar_mult.

Also, be sure to choose Option 1 on the System Design page.

Best regards,
Paul.

Last edit: 03 May 2021 17:51 by Paul Gilman.

Please Log in or Create an account to join the conversation.