- Posts: 2
HCPV's module parameters
- sultan_303
- Topic Author
Less
More
14 Feb 2021 00:51 #9287
by sultan_303
HCPV's module parameters was created by sultan_303
I need to use specific HCPV panels.
I couldn't found the parameters that SAM require for HCPV on an external module Data sheet ,
does SAM use specific HCPV module, if yes where can i found it? if no how can i insert the parameters of the external panel?
www.bsqsolar.com/wp-content/uploads/datasheet/Datasheet-BSQ-D280%20HCPV%20Module-v2.4-3T.pdf
I couldn't found the parameters that SAM require for HCPV on an external module Data sheet ,
does SAM use specific HCPV module, if yes where can i found it? if no how can i insert the parameters of the external panel?
www.bsqsolar.com/wp-content/uploads/datasheet/Datasheet-BSQ-D280%20HCPV%20Module-v2.4-3T.pdf
Please Log in or Create an account to join the conversation.
- pgilman
Less
More
- Posts: 5423
18 Feb 2021 18:13 #9306
by pgilman
Replied by pgilman on topic HCPV's module parameters
Hi Sultan,
You can use the equation from SAM's Help system in the definition of "Overall module area" to calculate the cell area from the module area and concentration ratio provided on the datasheet.
For the loss parameters, you can just use SAM's default values.
The datasheet says it is an "abridged data sheet." You might see if you can get the full version of the datasheet from the manufacturer.
Best regards,
Paul.
You can use the equation from SAM's Help system in the definition of "Overall module area" to calculate the cell area from the module area and concentration ratio provided on the datasheet.
For the loss parameters, you can just use SAM's default values.
The datasheet says it is an "abridged data sheet." You might see if you can get the full version of the datasheet from the manufacturer.
Best regards,
Paul.
Please Log in or Create an account to join the conversation.
Moderators: pgilman