direct steam generation for parabolic trough

Start
Prev
1
Next
End

tayeb feriani
Topic Author
New Member

16 Aug 2018 11:18 #6402 by tayeb feriani

direct steam generation for parabolic trough was created by tayeb feriani

Hi Paul,
I want to simulate a parabolic tough CSP plant working with direct steam generation but there is not a specific model in SAM. So how can i do?
thanks

Please Log in or Create an account to join the conversation.

Paul Gilman
Platinum Member

20 Aug 2018 20:27 #6403 by Paul Gilman

Replied by Paul Gilman on topic direct steam generation for parabolic trough

Dear Tayeb,

For process heat applications, SAM can model a parabolic trough field with pressurized water as the HTF, or a linear Fresnel field with direct steam.

Best regards,
Paul.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Moderators: Paul Gilman

NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.

NREL Home

NREL Research

Follow NREL

NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.