We will be performing a major infrastructure and web site ugprades on Friday, September 27th 8:00 am - 5:00 pm MST (UTC -7).

The website will be down during that time.

System Advisor Model (SAM)

Simulation HCPV,inputs data

Start
Prev
1
Next
End

1

Princess_Zaynab
Topic Author

More

19 Feb 2018 09:47 #6059 by Princess_Zaynab

Simulation HCPV,inputs data was created by Princess_Zaynab

Hello,

I am simulating HCPV with SAM.
I don't find: "optical error factor, alignment loss factor, wind flutter loss factor" in the data sheet.
Should I put them to 0 or 1 for not considering them?

For the airmass coefficients, I find only the spectral figure in function of the wavelenghts. Please, how can I have a0-a4 from this figure?

Also, I can't identify the elements from the data sheet that corresponds to the elements of " Cell Temperature".

Thanks in advance

Please Log in or Create an account to join the conversation.

pgilman

More

19 Feb 2018 18:38 #6060 by pgilman

Replied by pgilman on topic Simulation HCPV,inputs data

Please Log in or Create an account to join the conversation.

Princess_Zaynab
Topic Author

More

19 Feb 2018 21:24 #6061 by Princess_Zaynab

Replied by Princess_Zaynab on topic Simulation HCPV,inputs data

Thanks a lot !

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

1

Moderators: pgilman

Powered by Kunena Forum

NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.

Follow NREL

NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.